MISSING

ATM test kit This ATM test kit tests switch acceptance on multiple ATM network interfaces. The package features combinations of either two or three DS-1, DS-3, E-1, E-3 or OC-3/STM-1 hand-held network analyzers that can be used simultaneously to stress-test multiple switch interfaces with a full bandwidth of ATM cells and multiple streams. The kit features automatic testing and discovery modes, switched virtual circuit capability, IP Ping and channel monitoring and transmission. Prices ranges from $16,995 to $26,995. Fluke Corp.

Reader Service Card No. 170

Portable Sonet/ATM analyzer The MP1555A portable analyzer for troubleshooting Sonet, DS-n and ATM networks supports both U.S. and international mappings. It can be used to test networks in construction, maintenance and evaluate related equipment. The MP1555A has a small modular design. With the appropriate plug-in module, it can make jitter and wander measurements in all bit-rates. The cost of the MP1555A in a Sonet/PDH configuration is $35,000. Anritsu Co.

Reader Service Card No. 171

QAM digital video modulator The QAM256 digital video modulator provides bandwidth use for digital video distribution systems. The modulator meets DVB requirements for transmission of digital video on broadband coaxial cable and microwave radio. It features 4 to 256 QAM modulation, 1 to 55 Mb/s data rate, 1 to 8 MHz channel spacing and Reed Solomon forward error correction. Radyne Corp.

Reader Service Card No. 172

Operator platform The daVinci operator services platform, integrated with MDTelecom's MDzeroplus operator services software, allows a caller to connect to a live operator and continue processing the call after the operator has completed the service. The service features directory assistance request, commercial credit card call request, collect call request, third-party billed call request, LEC calling card request, person-to-person calls and general customer assistance. IEX Corp./MDTelecom

Reader Service Card No. 173

Digital data services products FastPort allows service providers to install DDS quickly over embedded copper loops without eliminating load coils or bridged taps. It supports long local loops without using mid-span repeaters. The UniPort provides DDS service over a single pair using standard 2B1Q line coding for loops up to 18,000 ft. Companies may use basic rate ISDN cards as CO channel units when paired with UniPort network interface units. Teltrend Inc.

Reader Service Card No. 174

ISDN/POTS hand-held test set The Kestrel 2 basic test set features a 32-character backlit LCD and layered menu operation over either the ISDN S-bus or U interface. An RS-232 port allows software downloading or optional upgrades from the Internet, which provide for test result printout, terminal emulation and message level protocol decode. Full decode and analysis of the D channel protocol is provided by optional PC-based software. In either ISDN or POTS modes, the unit features a ringer, last number redial, flash key and a 10-number speed dialing. Chesilvale Electronics Inc.

Reader Service Card No. 175

FPC connectors The surface mount 0.3 mm pitch FPC connectors have a profile height of 2.0 mm and miniature overall dimensions for tight packaging applications such as digital cameras, mobile phones and portable computers. The connectors feature a zero insertion force slide/hinge actuator. The metal actuator design can withstand multiple cycles and is plastic-coated to provide electrical insulation. The staggered bottom contact arrangement offers a wide FPC cable conductor area. The connectors are available in 27 to 51 circuits with tin-lead plating and in 55 circuits with gold plating. Molex Inc.

Reader Service Card No. 176

Network fax gateway The FutureFax is housed in a lightweight, compact cabinet and connects to a standard parallel printer port on any Windows PC. It functions as a fax gateway, allowing any network user to send faxes directly from a PC. It operates at 14.4 kb/s. It costs between $495 with 1 Mbyte of memory and $665 with 16 Mbyte of memory. AdvanceCom

Reader Service Card No. 177

UPS modules The 65 to 125 kVA series of 600T UPSs feature six pack insulated gate bipolar transistors in their inverters. An 80 kVA module with 208 VAC input and output is 34 in. wide. Features include dual-bus capability, transient response to 100%, monitor and alarms systems and acoustic noise less than 65 dBA. Liebert Corp.

Reader Service Card No. 178

Equipment cabinets The 19CAB series of 19 in. rack equipment cabinets have standard configurations available in 4 and 6 ft. tall enclosures. The cabinets' cold-rolled-steel construction provides 14-gauge frame members and 18-gauge panels and doors. Front and rear tapped vertical rails for mounting are included. A variety of add-on accessories and options can be specified to meet any application. The 6 ft. model costs $1249; the 4 ft. model costs $1079. Industrial Computer Source

Reader Service Card No. 179

DSX panel The Excellent 84 DSX-1 panel incorporates injection-molded plastic technology to provide a lighter weight DSX with the durability of traditional panels. Jack terminals are insert-molded into each jack frame, providing jack performance that meets all Bellcore standards. Offset bantam jacks provide 84 DS-1 terminations in a traditional single row. The Excellent 84 is offered in 5.25, 6 or 7 in. panels. Telect Inc.

Reader Service Card No. 180

Jumpers and adapters The E2A series of jumpers and adapters offers high-performance connectors for all Ultra Polish (-55 dB) and Angle Polish (-65 dB) applications. The series integrates a protective flap over the fiber end face. The self-opening and closing flap eliminates laser light emissions and protects the fiber end face from environmental contamination. Other features are mating security and high pulling strengths. The push-pull design makes unintentional disconnection impossible. Radiant Communications Corp.

Reader Service Card No. 181

Native fax messaging The Replix dominoFAX version 4.2 fits into the Lotus Notes environment by providing fax messaging capabilities that integrate into the Lotus Notes Mail template. It also provides foreign domain support and can retrieve billing summary information of all faxes. SoftLinx Inc.

Reader Service Card No. 182

Security system The Secured Network Access Platform lets service providers offer customers secured channels to prevent wire tapping of incoming and outgoing voice and fax calls. SNAP secures standard analog connections and ISDN lines. A user's call is routed automatically through the nearest SNAP encryption gateway. Before the call is completed the caller is signaled about that call's security level. MicroLink Ltd.

Reader Service Card No. 183

Modem dual filter The ModemGuard filters out telephone line noise and interference including that from static, hiss, RF and electronic. This dual filter also provides dedicated and isolated surge protection for both AC and DC. ModemGuard filters out problems affecting fax and other telecom application and reduces Internet dropouts caused by RF. It costs $54.95. Australian Protective Electronics

Reader Service Card No. 184

16-bit transmitter/receiver chipset The S3043 transmitter chip and S3044 receiver chip are integrated devices that support 2.5 GHz Sonet OC-48 standards. The S3043 transmitter with on-chip clock synthesis phased-locked loop components allows the use of a 155 MH z external transmit reference clock. The chip can be used as the front end of Sonet equipment. The S3044 performs all necessary serial-to-parallel and framing functions in conformance with Sonet/SDH transmission standards. It also provides the first stage of digital processing of a receive Sonet STS-48 bit-serial stream. Applied Micro Circuits Corp.

Reader Service Card No. 185

Interoperable cable modem The InfoRanger Multimedia Cable Network System-compliant cable modem enables high-speed Internet access and a wide variety of additional multimedia and networking applications over hybrid fiber/coax networks. It incorporates remote diagnostics, remote downloading of software and LED displays. Samsung Telecommunications America Inc.

Reader Service Card No. 186

B-series connectors These one-piece connectors for 1/2 in. high-flex cable are silver-plated for intermod performance typically better than -160 dBc. Return loss is better than 30 dB up to 3 GHz for a short assembly with B-series connectors on each end. The EC3 connectors have type N or 7/16 DIN male and female interfaces. Eupen Cable USA.

Reader Service Card No. 187